Production-ready · TRL 8–9

Lightweight structural castings, engineered to outperform steel.

Powered by DECA™ alloys. Built on GR3™ circular manufacturing. Half the weight of boron steel, on the manufacturing infrastructure you already have.

50%
lighter than boron steel at equal stiffness
2×
the strength and toughness
100%
recyclable, made from end-of-life scrap
5×
less factory floor space
Our vision
To build vehicles in India that lead the world in lean manufacturing, performance, range, design, structural integrity, zero end-of-life waste and easy repairability. Dr. Sumanth Shankar, Founder and inventor of DECA™
30 yrs

R&D in aluminium high-pressure die casting of automotive parts

15 yrs

developing the DECA™ alloy science and technology

Canada ↔ India

alloy innovation meets automotive manufacturing scale

The technology

DECA™: a new family of structural alloys

Dilute Eutectic Casting Alloys. Net-shaped castings that respond uniquely well to solid-state wrought transformations, even at high strain rates.

  • Cast to net shape, then wrought-processed for forged-class properties
  • Developed over 15 years and proven in commercial structural castings
  • The concept extends to titanium, iron and nickel super-alloy families
Example: the aluminium DECA™ system
13AlBase metal
26FeEutectic solute
30ZnPrecipitation strengthener
12MgPrecipitation strengthener
Cast net shape
→
Wrought-process
→
Structural part
Why DecaFort

DecaFort™ rethinks lightweight manufacturing

We challenge the way lightweight structural products have always been made.

One alloy family

Conductivity, corrosion resistance, strength and performance from one customisable family.

Net shape + wrought

A net-shaped casting followed by wrought processing of that casting. A unique combination.

Lean, modular build

Integrated modular designs cut part counts and assembly steps.

Economic game-changer

Efficient manufacturing with next-generation performance.

Fully repairable

Weldable and joinable to steel and to other aluminium alloys.

Circular by design (GR3™)

100% recyclable and reusable. Alloys made from 100% end-of-life scrap.

The advantage

From today’s barriers to DecaFort™ advantages

Every limitation of conventional lightweighting, and how DecaFort removes it.

Conventional lightweighting
✕Only ~10% weight saving
✕High capital investment
✕Complex, expensive manufacturing
✕Not easily recycled
✕Non-uniform performance
✕Not repairable
✕Dimensional instabilities
✕Limited design freedom
DecaFort™
✓50% lighter, with double the strength and toughness
✓Runs on existing manufacturing infrastructure
✓Lean, efficient manufacturing
✓100% scrap reclaimed; minimal new material
✓Uniform performance
✓Fully repairable by welding and joining
✓Dimensional stability
✓Modular builds and never-before design aesthetics
GR3 – Green, Recover, Recycle, Reuse Circular manufacturing

GR3™: circular from melt to end of life

Green · Recover · Recycle · Reuse. Every DecaFort™ alloy is born from scrap and returns to it, so structural parts stay in the materials loop instead of becoming waste.

100%

Recyclable

100%

Reusable

100%

End-of-life feedstock from automotive scrap

Zero

End-of-life waste

Benefits

What DecaFort™ parts deliver

Performance

LightweightStrongerRust-freeMalleableCrash protection

Efficiency

Longer rangeLower fuel useLower electricity use

Manufacturing

Net shapeModular assemblyWeldableJoinableRepairable

Design

Never-before aestheticsFreedom for curvesIntegrated modular designs
Proven performance

Half the weight of boron steel, at equal stiffness

−51%

In a like-for-like structural part with matched stiffness of 24,000 N/mm, the DecaFort™ casting weighs about half as much as its boron-steel equivalent.

Part weight at equal stiffness (24,000 N/mm)
Boron steel30.7 kg
DecaFort™15.1 kg

Same stiffness, half the mass: longer range, lower energy use and lighter structures.

Lean process

A radically shorter route from melt to part

No rolling. No stamping. DecaFort™ goes from molten metal to a cast structural part directly.

Boron steel 10 stations

  1. Melting
  2. Continuous casting
  3. Hot roll & anneal ×3
  4. Cold roll ×2
  5. Progressive-die hot stamping
  6. Super-structure integration
  7. Painting & finishing

DecaFort™ No rolling or stamping

  1. Melting
  2. Casting
  3. Rolling, annealing and stamping: eliminated
  4. Super-structure integration
  5. Painting & finishing
5×

less factory floor space

2.5×

fewer manufacturing steps

2×

less QA effort

Technology Readiness Level
TRL 8–9

The system is complete, qualified and proven in an operational production environment.

Production-ready today

Validated. Documented. Ready to scale.

1,000-part production runValidated with a 100% pass rate
Complete production lineFrom raw materials to final product
Process managementFeedback control with AI integration
Quality assuranceStandard operating procedures ready
Training programsTechnical and manufacturing programs
In-house verificationFrom melt chemistry to finished joint
Partner with us

Two paths to worry-free product readiness

Upgrade a part you already make, or bring us a concept and we’ll take it from design to production.

PATH A

Existing design

Upgrade a part you make today.

Your product→DecaFort™ production→Improved final product
PATH B

New design

Start from a concept.

Your concept→DecaFort™ design→DecaFort™ production→Final product
Capabilities

Engineering, production and quality, in-house

One team engineers every part from concept to finish, so design, alloy and process are optimised together.

Engineering

  • CAD part and tooling design
  • FEA structural validation
  • Casting fill and solidification simulation
  • Tailored DECA™ alloy selection
  • HPDC or gravity casting route
  • Anodised or plated finishes

Production

  • Melt treatment and degassing
  • High-pressure die and tilt-pour gravity casting
  • Forming and heat treatment
  • Anodising and chrome/nickel plating
  • Packaging and dispatch

Quality

  • Chemistry by optical emission spectroscopy
  • Tensile and bend testing (VDA standard)
  • Optical and SEM microscopy
  • Lap and butt joint testing
  • Leak and surface NDT
  • Cryogenic and high-temperature testing
Leadership

Our founder

SS

Dr. Sumanth Shankar

Founder · Inventor of DECA™
  • Professor of Mechanical Engineering, McMaster University, Hamilton, Canada
  • Founder, Light Metal Casting Research Centre (2004–present)
  • Research Scientist, Metal Processing Institute, WPI, USA (2000–04)
  • PhD, Materials Science and Engineering, WPI (2000)
  • B.Tech, Metallurgical Engineering, IIT (BHU) Varanasi (1996)

Lighter. Stronger. Circular.

Let’s build the next generation of lightweight mobility structures together.

Path AConvert an existing part
Path BCo-design a new product
PilotRun a validated production batch
Talk to our founder